Seek Outside Divide

 503,81 (inc. VAT)

Seek Outside Divide. Designed for the ultralight backpacker and backcountry adventurer who needs both light weight and comfort under serious loads.

Please note that hip belt is sold separately.

Out of stock

SKU: seek-outside-divide-4500 Categories: , Tag:

Join the waitlist to be emailed when this product becomes available

Seek Outside Divide

Seek Outside Divide is designed for the ultralight backpacker and backcountry adventurer who needs both light weight and comfort under serious loads, the Divide bridges the gap between traditional ultralight backpacking and load hauling external frames.

Other 2.5 pound packs do well with 20 – 25 pounds, and struggle above.  The Divide thrives with 30-50 pound loads and is capable over 100 pounds.

With a proven feature set tailored for lightweight backpackers, packrafters, and backcountry skiers, the Divide also delivers on ultralight backpack hunting trips where weight is of utmost importance.

Please note that hip belt is sold separately.

Handmade in Grand Junction, Colorado, USA.

Seek Outside Backpacks all feature

  • Seek Outside Suspension – all our backpacks use the same frame, hipbelt, & shoulder harness (save money by adding packbags down the road instead of buying a whole backpack).
  • Patent Pending Articulating Frame.  Our suspension will comfortably carry anything you can.
  • Adjustable Frame Height – 24″ -26″ – 28″ – Frame Extensions allow you to dial your pack height to your torso length or expected load weight.

Frame Size

The frame is 24″ on delivery, but it can be adjusted with a frame extension to 26″ (2″ extension) or 28″ (4″ extension). Frame extensions are used if you are going to carry a lot of weight, but also if you have a longer upper body. See table below for information if you need to add extensions to your order.

For more information on how to measure your torso length, see Seek Outside’s article “Which Frame Height is Right for me?“.

Example: If you have a torso length of 45 cm and plan to carry 15 kilos in the backpack, you should extend the frame with 2″ extensions so you get a frame of 26”.

Torso length Carrying weight up to 13 kg Carrying weight 13-23 kg Carrying weight above 23 kg
15″-16″ (38-41 cm) 24″ 24″ 24″ eller 26″ (add 2″ extensions)
17″-19″ (42-48 cm) 24″ or 26″ (add 2″ extensions) 26″ (add 2″ extensions) 26″ eller 28″ (add 2″ and/or 4″ extensions)
20″+ (49 cm+) 26″ (add 2″ extensions) 26″ or 28″ (add 2″ and/or 4″ extensions) 28″ (add 4″ extensions)

Why it’s Compelling

  • Minimum Trail Weight
    • UltraPE 400 – 2 lbs 12 oz
  • Volume – 4800ci | 79 L (not counting pocket volume)
    • Face Pocket adds roughly 800 ci.
    • Two side water bottle pockets sized to hold two Nalgenes each.
  • Load Range – 200+ lbs
  • Field Adjustable Frame Height
    • 24” frame for light to moderate loads
    • 26” frame for moderate to heavy loads
    • 28” frame for heavy loads or long torsos.
    • Quick tool-less field adjustment via Frame Extensions.
  • Integrated Platform – simple and lightweight.
  • Made in Colorado by people who are passionate about the same pursuits you are.


  • Weather resistant design:
    • Our packbag fabrics are forever waterproof.
    • Rolltop closure is highly water resistant.
    • No packbag zipper reduces potential water entry points.
    • No raincover needed, though Seam Sealing and / or drybags for sensitive gear are smart in very wet conditions.
  • Organization:
    • Large side water bottle pockets accept two Nalgenes each, or a tripod / spotting scope.
    • Extra durable mesh face pocket organizes and allows wet gear to drain.
    • Optional hip belt pockets, top lid, and Talons for more organization.
  • Gatekeeper Compression:
    • Six side straps (three on each side)
    • Two bottom straps
    • One over the top strap
    • Compression straps are moveable and removable.  Add extras if you need them.  Connect two together to make extra long straps for big or awkward loads.
  • 4-Way Forward Pull hipbelt closure with single center buckle allows top / bottom tension adjustment, easy to use.
  • 6061 T6 Aluminum Revolution Frame (Patented)
  • One removable aluminum horizontal cross stay.

Load Rating – 200+ lbs

Our frame will support over 300 lbs in vertical load.  YOUR max load will be determined by your body, not by the pack.


  • Frame Extensions – to learn more, click the Instructions tab, or read Which Frame Height Is Right For Me?
  • Lumbar Pad – Recommended if you don’t know if you’ll need it or not.  Some people really need it.  Some people really don’t.  Try it and return it if the fit is better without.
  • Top Lid, Talons, Hipbelt Pockets – gear organization is a personal preference.

Detailed Specifications

  • Weight
    • Shipped Weight
      • UltraPE 400 – 3 lbs 1 oz
      • Wolf EPLX400 – 3 lbs 5 oz
    • Minimum Weights (remove cross stay, minimum compression)
      • UltraPE 400 – 2 lbs 12 oz
      • Wolf EPLX400 – 3 lbs
  • Volume
    • Packbag – 4800 cubic inches | 79 L
    • Face Pocket adds roughly 800 ci.
    • Side Pockets hold two Nalgenes each.
  • Dimensions
    • Top Circumference – 43″  |  109 cm
    • Bottom Circumference – 42″  |  107 cm
    • Unrolled Height – 38″  |  97 cm
  • Materials
    • UltraPE 400 (Charcoal Gray)
      • Laminate of pure UHMWPE woven with polyester.
      • Waterproof to 200+ PSI
      • Abrasion Resistance – 7600 cycles Taber
      • Tear Strength 114.5 lb Warp, 117.6 lb Fill
    • Wolf Gray EPLX400
      • 400 denier recycled polyester laminate.
      • Waterproof to 200+ PSI
      • Abrasion Resistance – 3000 cycles Taber
      • Tear Strength – 34.4 lb Warp, 26.7 lb Fill
    • SpectraGridHT – many suspension components, pockets, accents, etc use Spectra.  This is a lightweight fabric woven with nylon and pure UHMWPE.  For a light fabric, it performs similarly to 500D cordura, with much better water resistance (1500 mm HH)
    • 500 Denier Cordura – Side pockets and many suspension components feature 500D Cordura for strength and abrasion resistance.
  • 4-Way Forward Pull Hipbelt Closure – Allows variable top and bottom tension to adjust fit to body type or relieve pressure points.  Is very secure and easy to use, and easy to tighten or adjust while under load.  Route the belt webbing through one slot in the center buckle to allow it to even top / bottom tension.  Route webbing through both slots to separate the top / bottom tension adjustment.

Included with Backpack

  • Eight compression straps (removable)
  • One over the top compression strap
  • Field repair kit

Seek Outside Hipbelt
Seek Outside Hipbelt Pocket
Seek Outside Top Lid


Defects in manufacturing and material for the practical lifetime of the product. Damage due to wear and tear or misuse will be repaired for a reasonable charge.



There are no reviews yet.

Be the first to review “Seek Outside Divide”

Your email address will not be published. Required fields are marked *

Shopping Cart
× How can we help you?
Check out our tent- and stove bundles!
This is default text for notification bar